CPU-Z for PC

Freeware system monitoring and diagnostics tool.

Free Download
Size: 2.13 MB

5/5 - (1 vote)

About CPU-Z

CPUID CPU-Z gives you a real-time report of your PC’s main devices or hardware. So you can quickly know all the information of Windows system at a time. As a result, get all information in one platform.

This is a freeware program created by CPUID. It aims to provide you with an in-depth report about all the components inside your system. It can only provide details and monitor your system’s processor.

Its interface has seven tabs which offer information about the CPU, Mainboard, Memory and Graphics as well. The interface looks very basic but it contains many features that you may need.

CPU: The first tab is the CPU tab. Here are details about the following information.

Processor – The section provides the CPU name, code name, package, core voltage, Max TDP (thermal design power), technology, specification and more.
Clocks – In the ‘Clocks (Core #0)’ section, you can show clock information including core speed, multiplier and bus speed.
Cache – From below, you will see the ‘Cache’ section. Here you will show the L1 data cache size and descriptor. You will also see the L1 Instruction Cache and the level 2 or level 3 size.

Mainboard: This tab is commonly called the motherboard interface. Here you will see the following details…

Motherboard – For manufacturer name, model, bus specs, chipset, sensor and southbridge information.
BIOS – See BIOS brand name, version and update date in this section.
Graphic Interface – For display Bus, transfer rate and side band addressing information.

Memory: The third tab is the Memory section where you will see the following information…

General – About your computer or laptop memory type, size, channels and uncore frequency.
Timing – For DRAM frequency, FSB:DRAM, command rate, latency, delay, refresh cycle time and more.

SPD: The other tab called the SPD (serial presence detect) provides you with the following information…

Memory Slot Selection – For information such as module manufacturer name, DRAM manufacturer name, maximum bandwidth, module size, port number, serial number, rank and more.
Timing Table – For timing frequency, latency, precharge capacity, tRAS, tRC, command rate and voltage.

Graphics: The fourth tab is called the Graphics interface. Here you can see information about your computer’s graphics card whether internal or external.

GPU – Here you can see the graphics card name, board manufacturer name, code, revision and perf level.
Clocks – To know the GFX core speed

Bench: This tab is not that important but if want you can also know CPU signal thread, CPU multi thread, Benchmark version etc.

About: The last tab provides some information about this app. In this interface, there is a section called Windows Version where you will find information about your operating system.

On the bottom, a nice feature is the ability to save all reports to your PC. Simply click on the ‘Save Report’ to save every information of your system in one click.

It has some more useful features that you can check once you install this small app on your computer or laptop. Hope it will be useful.

Pros

Easy to use
Simple installation
Free of cost
Real-time monitoring of your system information.
Processor name and number, codename, process, package, cache levels.
All information is provided in a separate window.
Any report is saved in a different format like plain text or HTML.
Real-time measurement of each core’s internal frequency and memory frequency.

Cons

Provides less information than other advanced applications, provides just basic data
Cannot be maximized application
In my opinion, the font size would have been a little bigger